RK3588 6 TOPS NPU Government Board for Tax Office, WF-S3399, AndroidSBC, Jeddah

TL;DR: RK3588 6 TOPS NPU Government Board for Tax Office

AndroidSBC release: twelve-model WF-S government service kiosk motherboard family opens for volume orders serving Jeddah, Saudi Arabia. The WF-S3399 government service kiosk Android motherboard spans the dual-screen high definition service terminal and eleven sister models in the WF-S series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, dual 4K output, HDMI plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-S family from the Longgang source factory in Shenzhen to Jeddah and Saudi Arabia importers who run citizen service hall, tax and social security counter, certificate printing, identity verification, public information display and outdoor smart city programmes.

About AndroidSBC and the Government Service Kiosk Android Motherboard Family

AndroidSBC supplies Jeddah and Saudi Arabia buyers as a source factory, not as a trading desk. That distinction matters in public sector work, where a tender often asks who owns the schematic, who signs the conformity file and who carries the seven-year support commitment. On the WF-S family all three answers are the Longgang plant. Certification, carton labelling and palletisation for Saudi Arabia are prepared in Shenzhen by the export desk before the Jeddah shipment leaves, and the test reports stay versioned against the board revision.

WF-S3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-S3399 (dual-screen high definition service terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Saudi Arabia importers sourcing the WF-S family, the WF-S3399-A variant is the typical configuration for the high resolution citizen information terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Government Service Kiosk Android Motherboards for Saudi Arabia Buyers

Counter downtime is the number that gets a Jeddah project criticised, and it usually traces back to the board: a watchdog that is not wired, a scheduled power cycle that does not survive a mains dip, an OTA push with no rollback path.

The driver problem is solved by integration at the factory. The WF-S family arrives with capacitive and IR touch, ID card reader, fingerprint, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay drivers already on the Android image that Jeddah integrators receive. As of September 20, 2026, 13000 boards are allocated to Jeddah and Saudi Arabia, the 3rd allocation this cycle, moving on the Jeddah - Shanghai lane.

Competitive Comparison: WF-S3399 vs Competing Government Service Kiosk Android Boards

Saudi Arabia procurement teams ask the same four questions at every tender, and the answers tend to disqualify suppliers before the price discussion starts. These are the four that decide the outcome for Jeddah.

• vs single-platform board vendors: the WF-S family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-S family arrives with capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay drivers already integrated, so the {city} integrator writes the citizen service application rather than the driver layer.
• vs boards without unattended-operation features: the WF-S family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-S family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a citizen screen plus an operator screen and a mirrored duplicate.

Global Government Self-Service / Citizen Service / Public Information Terminal Market Trends

The number that moves a Jeddah project is not the market total but the terminal count per hall: dual-screen high definition service terminal programmes in Saudi Arabia are expanding faster than headcount, and the public-sector kiosk market is tracked at roughly USD 2.05 billion in 2025 on its way to USD 3.95 billion by 2032.

• Citizen service halls and municipal counters: WF-S3399 is the usual starting point for hall rollouts, with the dual-screen WF-S5270 as the citizen plus operator option.
• Tax, social security and housing fund terminals: the mid-tier WF-S5270 and the printing-capable WF-S8800 sister SKUs form the counter ladder, with certificate printing and queue management.
• Outdoor and 24-hour unattended cabinets: WF-S8800 and the industrial sister SKUs cover continuous-operation municipal self-service points across a city estate.

AndroidSBC tracks these numbers for Jeddah and Saudi Arabia planning purposes rather than as forecasts, and publishes the underlying assumptions to integrators on request.

Partner Success Story: Hanul Citizen Service (civil service terminal supplier)

The Hanul Citizen Service case in the Korea government segment is a working example of how the WF-S family from AndroidSBC supports Jeddah integrators. Hanul Citizen Service deployed 13000 WF-S government service boards across community service centres and civil petition counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Citizen Service branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CITC / SASO conformity, all bundled into the Shenzhen source-factory shipment.

As Hanul Citizen Service Digital Operations Head for Korea Government put it: Hanul Citizen Service needed the fingerprint module and the document scanner to survive a firmware push, and the staged OTA with rollback on the WF-S is what kept 13000 terminals in Saudi Arabia running through two update cycles.

Field Report: dual-screen information terminal rollout at a public security service hall

SHENZHEN, September 20, 2026 - Bai Yu, AndroidSBC field desk. Thermal checks on the WF-S3399 lot covered both the indoor counter case and the unattended cabinet case, since a Saudi Arabia estate usually contains both. The WF-S3399 government service kiosk Android motherboard order for Jeddah, Saudi Arabia cleared the burn-in station on schedule and is en route via the Jeddah - Shanghai lane.

The WF-S3399 dual-screen high definition service terminal production lot includes the WF-S3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Saudi Arabia integrators, the CITC / SASO conformity plus CITC type approval with SASO IECEE conformity paperwork is bundled.

Filed by Bai Yu, AndroidSBC field desk, SHENZHEN. CITC plus SASO; Riyadh and Jeddah ministry service centres push MADA payment compliance on citizen service boards.

WF-S3399 Application Scenarios

The WF-S3399 dual-screen high definition service terminal sits inside a twelve-variant WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-S3399-A configuration is the typical build for the high resolution citizen information terminal use case, with identity peripheral driver SDK and staged OTA management bundled.

• Citizen service hall enquiry and queue points: WF-S3399 plus WF-S8801 form the hall entry ladder, with independent dual display output and 4K HDMI.
• Tax, social security and housing fund counters: WF-S8801 plus WF-S3600 are the usual pairing where certificate printing and ID verification run on the same board.
• Immigration and public security checkpoints: WF-S3600 is the dedicated secure identity SKU, with secure boot, trusted execution and an audit trail that survives a power cycle.
• AI identity verification and face recognition terminals: WF-S3601 plus WF-S3602 cover the vision and verification workload on the device.
• Community and neighbourhood service desks: the compact WF-S3399 and the entry-tier sister SKUs serve walk-in enquiry where counter space is limited.
• Outdoor and semi-outdoor municipal cabinets: the industrial T527 sister SKU takes the 24-hour unattended points that see a full seasonal temperature range in Jeddah.
• Hall notice and announcement networks: the H618 and A133 sister SKUs drive continuous-play public information screens across a Jeddah building estate.
• Document scanning and form filling terminals: WF-S3602 plus WF-S8801 pair the scanner and the signature pad on one board for the Jeddah administration.
• Legacy estate refresh programmes: the RK3288 and RK3399 sister SKUs match the mechanical and electrical footprint of existing Jeddah hall terminals, so a refresh does not become a redesign.

Partnership Models for Jeddah Buyers

AndroidSBC runs three entry tracks for Jeddah and Saudi Arabia partners, and the WF-S family is the same platform underneath all three.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The three tracks exist because Jeddah and Saudi Arabia buyers enter at different stages: some start with a sample board, some with a tender, and some with a private-label programme already sold.

Frequently Asked Questions

Does the WF-S government service kiosk Android motherboard family support a dual-screen high definition service terminal?

Answer: Yes, and it is qualified on the same production line as the rest of the family. The dual-screen high definition service terminal runs on the WF-S baseline image that Saudi Arabia buyers receive, so there is no separate integration project.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-S family?

Answer: The RK3399 is one rung on an eight-step ladder. The WF-S family starts at Allwinner A133 and H618 for enquiry and notice screens, steps up to RK3566 and RK3568 for dual-screen counters and certificate printing, covers legacy estates with RK3288 and RK3399, adds the Allwinner T527 industrial tier for outdoor and unattended cabinets, and tops out at RK3588 for AI identity verification and multi-screen halls. AndroidSBC keeps all eight on one Android baseline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Saudi Arabia?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, handles the conformity paperwork for Saudi Arabia from the Shenzhen plant, including CITC type approval with SASO IECEE conformity documentation and the CITC / SASO file that travels with the Jeddah shipment.

What are the MOQ and lead time for a first order of the WF-S government service kiosk Android motherboard family?

Answer: For Saudi Arabia programmes the entry points are one board as a sample, 100 boards for OEM branding and 500 boards for an ODM design. Mass production lead to Jeddah is 15-30 days from BOM sign-off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-S family?

Answer: Yes. AndroidSBC writes and maintains custom firmware for Saudi Arabia public sector deployments, from kiosk-mode lockdown and pre-installed applications through to a full AOSP build or a Linux BSP port.

How are software updates and long-term support handled on the WF-S family?

Answer: Updates are staged, not forced. AndroidSBC publishes firmware revisions to Jeddah integrators, who validate them before pushing to the estate, and every OTA supports rollback if an identity reader or printer misbehaves on the new image.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-S family?

Answer: Yes. For Saudi Arabia distributors using FBA or a 3PL, AndroidSBC prepares the labelling, the pallet plan and the export documents in the same building that builds the boards.

How are RMA and DOA replacements handled on the WF-S government service kiosk Android motherboard family?

Answer: The RMA path starts from the lot record. AndroidSBC keeps BOM, firmware revision and test logs for every Saudi Arabia shipment, which is what lets a Jeddah integrator file a claim with the board serial rather than a description.

Contact AndroidSBC: Start Your WF-S3399 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-S government service kiosk Android motherboard family. Jeddah integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Saudi Arabia buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-S family.